Lockable Shaft Nuts with Radial Clamping
ALMA shaft nuts with radial clamping combine high clamping force and structural rigidity with excellent axial runout accuracy, reduced machining requirements and reliable, releasable locking.
ALMA shaft nuts with three-point clamping feature three clamping points evenly spaced around the circumference. This design distributes forces more evenly and, according to the manufacturer, delivers 30 per cent higher clamping force than a comparable two-point design. It also promotes favourable load distribution within the nut body.
The nut body’s relatively large radial cross-section provides high structural rigidity. This reduces unwanted deformation during tightening and clamping, ensuring reliable and repeatable positioning on the shaft.
Für Anwendungen mit erhöhten axialen Belastungen stehen besonders breite Extra-wide versions are available for applications with increased axial loads. The larger load-bearing cross-section allows higher axial forces to be accommodated and transmitted. The permissible load must be determined based on the specific nut size, shaft thread and manufacturer’s specifications.
The shaft nut’s internal thread and bearing-side contact face are machined in a single setup, ensuring high axial runout accuracy. This is particularly beneficial for precision bearing arrangements, spindles and rotating assemblies, as it helps distribute the axial force evenly across the adjoining component.
The shaft nut is secured directly to the shaft thread by radially arranged clamping screws or locking pins, eliminating the need for a separate lock washer. In applicable designs, the locking pins are machined together with the nut’s internal thread. This ensures precise engagement with the shaft thread without significantly affecting the adjusted axial runout.
Since no lock washer is required, the corresponding groove in the shaft thread is also unnecessary. This eliminates the milling and subsequent deburring of the locking groove. Fewer components also simplify design, procurement, assembly and future maintenance.
The shaft nut is first set to the desired axial position or tightened to the specified torque. It is then secured radially using the integrated clamping screws. As locking is achieved through a separate clamping operation, the nut can also serve as a precision adjusting nut. Positioning and locking against rotation can therefore be set largely independently of each other.
Three-Point Radial Clamping
Thread Tolerance Class 4H
Clamping Screw
Profiled Locking Pin
Material Options
Black-oxidised steel with uncoated threads and contact face, or all-stainless-steel construction.
Uncoated Contact Face
Axial Runout Accuracy
Up to M80 – 0.002 mm
Above M80 – 0.005 mm